**Ubiquiti PowerBeam M5 400 ISO – PBE-M5-400-ISO** The Ubiquiti PowerBeam M5 400 ISO is a powerful airMAX Bridge designed for deployments that require maximum performance and RF isolation. It incorporates advanced engineering and proprietary airMAX technology to ensure optimal performance. Key Features: – Frequency: 5 GHz – Throughput: 150 Mbps – Range: 25 km – Gain: 25 dBi – Dish Reflector: 400 mm Installation is plug and play, making it easy to set up and get started. The PowerBeam M5 400 ISO directs RF energy in a tighter beamwidth, improving RF isolation to spatially filter out interference. With its combination of focused beam directivity and RF isolation, the PowerBeam ISO blocks noise to improve noise immunity, especially in areas crowded with other RF signals of the same or similar frequency. Hardware Overview: The PowerBeam M5 400 ISO provides superior RF isolation, as demonstrated in the two near-field plots. Both plots are displayed in watts using a linear scale, highlighting the PowerBeam’s ability to effectively manage RF signals. Technical Specifications: – Processor Specs: Atheros MIPS 74Kc, 560 MHz – Memory: 64 MB DDR2, 8 MB Flash – Networking Interface: 1 x 10/100/1000 Ethernet Port – Wireless Approvals: FCC, IC, CE – RoHS Compliance: Yes Physical/Electrical/Environmental: – Dimensions: 459 x 459 x 261 mm (18.07 x 18.07 x 10.28″) – Weight: 3.22 kg (7.10 lb) – Power Supply: 24V, 0.5A Gigabit PoE – Power Method: Passive PoE (Pairs 4, 5 ; 7, 8 Return) – Supported Voltage Range: 18-26VDC – Max. Power Consumption: 8W – Gain: 25 dBi Operating Frequency: – Worldwide: 5170 – 5875 MHz – USA: 5725 – 5850 MHz – Wind Loading: 390 N @ 200 km/h (88 lbf @ 125 mph) – Wind Survivability: 200 km/h (125 mph) – LEDs: Power, LAN, WLAN (4) – Signal Strength LEDs: Software-Adjustable to Correspond to Custom RSSI Levels – Channel Sizes: 5/8/10/20/30/40 MHz – Polarization: Dual Linear – Enclosure: Outdoor UV Stabilized Plastic – Mounting: Pole-Mount Kit Included – ESD/EMP Protection: Air: ± 24 kV, Contact: ± 24 kV – Operating Temperature: -40 to 70° C (-40 to 158° F) – Operating Humidity: 5 to 95% Non-Condensing – Salt Fog Test: IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5 – Vibration Test: IEC 68-2-6 – Temperature Shock Test: IEC 68-2-14 – UV Test: IEC 68-2-5 at 40° C (104° F), Equivalent: ETS 300 019-1-4 – Wind-Driven Rain Test: ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5.
