Supercharge your video surveillance network with the Hikvision DS-3E1518P-EI(V2) 16-Port Gigabit Smart Managed PoE Switch, engineered for high-performance power delivery and intelligent control in demanding IP CCTV environments. Boasting a generous 370 W PoE budget (IEEE 802.3af/at, up to 30 W per port), it seamlessly powers 16 Gigabit PoE ports for cameras, PTZ domes, and access points—eliminating the need for separate injectors and simplifying installations in warehouses, retail spaces, or large campuses. Enable 300 m long-range transmission mode on all PoE ports to extend coverage for remote outdoor setups without signal loss, ideal for perimeter security. Two Gigabit SFP slots provide flexible fiber uplinks for backbone connectivity, supporting up to 36 Gbps switching capacity for lag-free 4K video streams. Harness advanced smart management via intuitive web GUI and Hik-Partner Pro cloud platform: configure 802.1Q VLANs for secure traffic segmentation, STP/RSTP for loop-free topology, port isolation for enhanced privacy, and link aggregation for bandwidth boosting. The PoE watchdog auto-restarts faulty devices, while real-time monitoring tracks usage, alarms, and topology from anywhere. With 6 kV surge protection, fanless metal housing, and rack-mount design, this unmanaged-to-managed hybrid delivers enterprise reliability at a fraction of the cost—perfect for scalable, future-proof surveillance networks. Attribute Name Attribute Value Model DS-3E1518P-EI(V2) Ports 16 × 10/100/1000 Mbps PoE ports 2 × 1000 Mbps SFP slots PoE Standard IEEE 802.3af, IEEE 802.3at PoE Power Pins End-span: 1/2(-), 3/6( ) PoE Ports Ports 1 to 16 Max Port Power 30 W PoE Power Budget 370 W total Long Range Mode Ports 1 to 16: up to 300 m (performance varies by camera/cable) MAC Address Table 8 K Switching Capacity 36 Gbps Packet Forwarding Rate 26.78 Mpps Internal Cache 4.1 Mbits VLAN Support 802.1Q (VLAN ID 1-4094, Trunk/Access/Hybrid modes, max 4094 VLANs) Link Aggregation Static LACP (8 groups for load balancing/bandwidth expansion) Port Isolation Ports 1-16: isolation mode for security (intra-group communication blocked) Loop Prevention STP (802.1D), RSTP (802.1w); disabled by default PoE Watchdog Ports 1-16: auto detect and restart non-responsive cameras Cable Diagnostics Locates open/short circuits and cable length Management Web GUI, Hik-Partner Pro cloud, Hik-Central Pro, DHCP Client, Super IP (10.180.190.200) LLDP 802.1ab for peer device discovery Port Mirroring Supported for fault locating (up to 4 sessions) QoS Port-based, 802.1p, DSCP priority Power Supply 100–240 VAC, 50/60 Hz Max Power Consumption 410 W (full PoE load) Idle Power Consumption 25 W Surge Protection 6 kV Operating Temperature 0 °C to 50 °C (32 °F to 122 °F) Storage Temperature -40 °C to 85 °C (-40 °F to 185 °F) Operating Humidity 5% to 95% (non-condensing) Installation 1U rack-mounted, desktop/wall-mounted Housing Metal shell Dimensions (W × H × D) 440 mm × 44 mm × 230 mm (17.32″ × 1.73″ × 9.06″) Net Weight 3.41 kg (7.52 lb) Certifications EMC: CE-EMC (EN 55032:2015 A11:2020, EN IEC 61000-3-2:2019, EN 61000-3-3:2013 A1:2019, EN 50130-4:2011 A1:2014, EN 55035:2017 A11:2020); Safety: CB (IEC 62368-1); Chemistry: CE-RoHS (2011/65/EU), WEEE (2012/19/EU), Reach (EC No.1907/2006)
